A player looking down the fairway at first light

Our Story

We only make gloves.
That's the point.

We don't make clubs, balls or bags. We make gloves — and we've given every hour we have to getting one thing exactly right.

The Idea

It started with a grip.

Every golfer knows the feeling: a glove that bunches on the takeaway, slips in the rain, or goes shiny after three rounds. We started JOKLOVEN because we were tired of it.

So we narrowed it down. One category. We chose Ethiopian Cabretta. We built our own cut plans, mapped perforation to the hand instead of a template, and refused every shortcut that showed.

That discipline became our standard. Six checks we hold every single pair to, from the first hide to the last stitch — a promise you can test with your own hand.

"A glove has one job: to disappear. Everything we do is in service of that."

— JOKLOVEN design notes

Craft & Materials

From hide to hand.

Every step between a raw Cabretta hide and the glove on your hand has one rule: don't hurry it.

Marking a leather panel by hand at the workbench

Select

Ethiopian Cabretta hides, chosen for grain, softness and sweat resistance — tested by hand, not by brochure.

Pattern

Every glove begins as a hand-drawn line. The shape is mapped to the hand, revised, and checked before any leather is cut.

Cutting a leather panel along a metal straight edge

Cut

Panels are cut from the calmest section of each hide, so no two gloves fight the same way.

Punching ventilation holes through a leather glove panel

Perforate

Vents are mapped to the heat zones of the back of the hand — cooling without weakening the grip surface.

Stitch

Single-needle seams at every stress point. The wrist tab closes flat, with the signature script set into the leather. Every pair is then checked by hand and by eye against the six standards.